Archives

CONTRUCTION DESIGN OF LIFT TOOLS CAPACITY 10 TONS


Martoni
Abstract

Maintenance of large-scale industrial equipment requires a lifting mechanism that meets certain requirements. Then it is necessary to design a lifting equipment that meets these requirements. In this design the requirement is to be able to lift as much as 10 tons, can be operated in a limited space and must be free from sparks. The design of this lifting mechanism is used to lift a pump with a diameter of 744 mm and a length of 6,000 mm. During this time the activity of lifting the pump was carried out using a Tower Crane over the roof of the building with a height of about 30 meters. The use of Tower Crane must be rented at a cost of hundreds of millions of rupiah for one maintenance, therefore the problem that will be solved is how to design a lifting mechanism that is in accordance with the above conditions with a fairly light weight. The goal to be achieved is to design an efficient lifting mechanism. The scope of this design is that the load analyzed is static. Selection of hois components, structure and carriage according to standard.

Volume 11 | 05-Special Issue

Pages: 391-400